![background image](http://html.mh-extra.com/html/king-pigeon/s175/s175_user-manual_1969937011.webp)
Page 11 of 55
King Pigeon Hi-Tech. Co., Ltd.
Ver 1.3
GSM/SMS/GPRS/3G/4G
Cellular IoT Gateway
Ethernet
(Only for S37x)
Rate indicator: ON stands for 100Mbps;OFF stands for 10Mbps
Link indicator:ON means connecting;OFF means disconnect;flick means transmitting
data
ATN Port Connector Definition
ATN
GSM/3G/4G Antenna connector, 50Ohm, SMA male.
USB Port Connector Definition
USB
USB port, for configuration and upgrading firmware and exporting historical data;
6. Settings&Operation
The Cellular IoT Gateway is user-friendly design. The user can setup it or export historic data by the PC
Configuration through USB cable, and upgrade firmware by USB port. The Cellular IoT Gateway also can be
configured some basically parameters by SMS Commands, please refer to
.
Tips!
1)
Please insert the SIM Card firstly, and install the GSM/3G/4G Antenna, please power on to check the LEDs status according to above
mentioned LED Definitions, keep switch on it during the programming.
2)
The PC Configuration in the CD, please click it to run.Also can download from
under S17X/S37X page directly.
Below is the steps to setup the parameters by PC Configuration, please follow it step by step.
6.1 Start to Configure
Step1: Install the Configuration software
The Configuration software in the CD or download from
, then installs it on the
computer.
Step2: Connection
Please insert the SIM Card, and install the GSM/3G/4G Antenna.
Step3: Connect the Gateway to the PC by USB Cable. And connect the external DC Power to DC Power Ports,
Power on, and switch on the device, see below:
Step4: Install USB Driver
Install the USB Driver to the computer from the CD firstly. When successful, it can be found out at the device
manager of the XP or Windows 7 or Win8/Win10, please see the below photo. Also, the driver for different
OS can be downloaded from Silicon Laboratories, Inc.
, the model is CP210x.