![background image](http://html.mh-extra.com/html/king-pigeon/s175/s175_user-manual_1969937013.webp)
Page 13 of 55
King Pigeon Hi-Tech. Co., Ltd.
Ver 1.3
GSM/SMS/GPRS/3G/4G
Cellular IoT Gateway
Tips:
If not connect successfully, will not enter into next step. Pls check if USB connect well, or COM port and
password correct or not.
6.2 Setting Self-checking
Phenomenon
Possible Reason
Can't enter software
1. USB Driver installation failure;
2. COM Port not correct or USB driver installation failure;
After switching panel on,
only Power light on, panel
can't work
1. The Upgrade Firmware Switch at Load side, not at Work side.
Solution: Switch the power switch to OFF---->Upgrade switch to Work side---->
Power switch to ON;
2. SD card fall out from the slot. Solution: Shake panel to listen if there is voice
or not;
3. In upgrade mode, use upgrade tool erased the firmware.
Can't enter into working
mode
1. The Upgrade Firmware Switch at Load side, not at Work side.
Solution: Switch the power switch to OFF---->Upgrade switch to Work side---->
Power switch to ON;
Can't find COM Port
1. Have not installed driver;
2. PC system problem cause driver installation failure, can't support Apple OS
system.
3.Check USB line, and try other common driver software such as "Drive TheLife".
In working mode, the
device not response the
Modbus command
Have not set the device ID. Solution: In setting mode, set device ID---->Switch
the device to Run mode.
After switching panel on,
not running according to
parameter setting
After parameter setting, forget to click "Save" button in the menu.
Solution: Back to Set mode---->Click "Save" Button after setting one page in the
menu.
Terms usually used by Cellular IoT Gateway
Cellular IoT RTU, Modbus RTU, Modbus Master, Modbus Slave, Modbus RTU Over TCP,
Modbus TCP, Arm, Disarm...