UNPACKING AND CHECKING CONTENTS
UNPAKING AND CHECKING CONTENTS
Separate all parts from packing materials and check each item with illustration and "Table of Loose Parts."
NOTE
: Make certain all items are accounted for, before discarding any packing material.
WARNING
: To avoid injury, if any parts are missing, do not attempt to assemble the Belt and Disc Sander, plug in the power cord, or
turn the switch on, until the missing parts are obtained and installed correctly.
WARNING
: For your own safety, never connect plug to power source outlet, or insert switch key until all assembly steps are complete
and until you have read and understood the entire instruction manual.
TOOLS NEEDED
Standard screwdriver
Phillips screwdriver
10mm Wrench
6mm hex. key
Combination square
COMBINATION SQUARE MUST BE TRUE
Draw light line on board
along this edge
Straight edge of board 3/4”
thick. This edge must be
perfectly straight
There should be no gap or overlay when the
square is flipped over in dotted position
Item
A
B
C
D
E
F
G
H
Table of loose parts
Sander assembly
Instruction manual
Table
Sanding disc
Table support
Disc guard
Work support
Bag assembly contains:
Knob
Washer
Screw
Switch key
Lock washer
Scale label
Hex. hd. screw
Qty
1
1
1
1
1
1
1
1
5
2
1
4
1
4
