GETTING TO KNOW YOUR SANDER
WARNING:
To avoid injury from accidental start, turn switch "OFF"
and remove plug from power source outlet before making any
adjustments.
1.
Backstop
. Supports the workpiece on the sanding belt.
2.
Hex Socket Head Screw
. Loosening screw allows belt bed to be
raised to the vertical position.
3.
Tracking Knob
. Turning knob counterclockwise causes sanding
belt to move towards the disc, turning knob clockwise causes
sanding belt to move away from the disc.
4.
Tension Lever
. Silding lever to the right releases the sanding
belt tension; sliding lever to the left applies belt tension.
5.
Table lock Knob
. Loosening knob allows the worktable to be
tilted for bevel sanding (Scale pointer on table trunnion; scale
attached to base.)
6.
Auxiliary Mounting Hole
. Allows table assembly to be mounted
for end sanding when the bed is placed in vertical position.
7.
On-Off Switch.
Auxiliary mounting hole
4-Tension lever
Work support hex. screw
2- Bed locking hex. hd. screw
Belt bed
3- Tracking knob
5-Table lock knob
Mounting hole
Base
1- Work support
Sanding belt
Mounting hole
7- On-Off switch
Disc guard
Disc worktable
Sanding disc
Sanding plate
