Kinetic
®
digitizor
TM
M-DAB 0001 User Guide
5
THE REMOTE CONTROL
INSTALLING THE REMOTE CONTROL BATTERY
Hold the remote control with the back facing you and with the battery compartment to
your left. Release the small catch and simultaneously slide the battery holder out.
Fit the CR2025 3 volt lithium battery (!! ensure the '+' signs on the battery, the battery
holder and the remote control match !!) to the battery holder and slide both battery and
holder into the remote control's battery slot. Ensure that the catch locks into place.
Confirm that the battery is installed and working correctly: hold any button and check
that the red LED on the top edge of the remote control illuminates.
THE REMOTE CONTROL
There is no need to point or aim digitizor's remote control towards a sensor and the
remote will work in bright sunlight, because the remote signals are sent by radio, not by
infra-red.
THE REMOTE CONTROL FUNCTIONS
All you need to know to get going is explained in the set-up instructions so if you wish
you can skip the following detailed explanations of the remote's button functions for now
and go straight to page 8.
