Kinetic
®
digitizor
TM
M-DAB 0001 User Guide
10
17. Insert the power cable plug into the 12V DC socket of your digitizor and turn it
gently 90 degrees clockwise to lock it in place. The indicator LED on the digitizor
box will glow red and, after a few seconds, the hiss from your radio will cease.
18. digitizor will automatically search for DAB stations and create a station list. The
display will show [FFF N]. FFF denotes the channel currently being scanned, and N
indicates how many stations have been detected.
19. When the scan is complete, digitizor will play the DAB station that is listed first
alphabetically.
20. Your DAB aerial may require internal / phantom power (please refer to your DAB
aerial's instructions), in which case you MUST switch on the aerial power, otherwise
the aerial will not function properly, if at all:
a. Press the remote's 'MENU' button. Your radio’s display shows ‘87.6’.
b. Press the
▼
button repeatedly until 'ANTENNA' shows on your radio's display.
c. Press the
■
button.
d. Press the
▼
button until 'ANT ON' shows on your radio's display.
e. Press the
■
button.
f. Display shows 'DONE'. Aerial power is now 'ON'.
g. Press and hold the DAS button to re-scan for DAB stations.
21. Use the
▲ ▼
buttons to select a DAB station of your choice. Stations may take
a few seconds to tune, depending upon your FM/AM radio.
22. Secure the digitizor box and tidy the cables AWAY from the digitizor box. Avoid
coiling excess power or aerial cables.
23. Check all is working correctly, re-fit the FM-RDS radio and you are ready to enjoy
in-car DAB!
24. Please turn to page 11 for the detailed Wired Connection User Instructions.
