Kinetic
®
digitizor
TM
M-DAB 0001 User Guide
7
3) repeatedly to scroll through digitizor's Autoscanned clear FM
frequencies.
4) to access FM preset buttons (1 ~ 4) in AutoScan mode.
1 ~ 4
1) to save or recall 12 (4 x 3 blocs) preset DAB stations.
2) to save or recall 4 preset FM transmission frequencies (wireless
connection - AutoScan mode).
MENU
To enter SETTINGS MENU.
Use
◄◄
&
►►
and
▲
▼
&
to navigate the settings menu.
Use
■
to confirm your selection.
[
FREQUENCY
] - Displays the current FM transmission frequency. Press
■
to reset the FM transmitter to 87.6MHz. (Wireless connection.)
[FM MODE] – selects operating mode (AFC_H/AFC_L/ AutoScan).
(Wireless connection.)
[FULLSCAN] – scans for DAB/DAB+/DMB-A stations.
[ANTENNA] – must be set to ON for internally powered active DAB aerials
and OFF for all other aerials.
[DABRESET] – clears all DAB stations and DAB presets. digitizor will
automatically perform a scan for DAB stations after the reset is
completed.
[FACTORY]. - restores digitizor to Factory Settings. digitizor will
automatically perform a scan for DAB stations after the factory reset is
completed. Switch the car radio to FM 87.6MHz to continue to listen to
DAB. !!Factory reset will erase all previous system settings to default!!
[VERSION] – displays the current software version.
[UPGRADE] - for technician use only.
Most remote control commands are automatically applied after a delay of 3 or 10
seconds. To speed up the execution of such commands press the
■
button. For clarity
this function has been omitted from many of the step-by-step installation and operation
instructions.
