Kinetic
®
digitizor
TM
M-DAB 0001 User Guide
15
15. digitizor will automatically search for DAB stations and create a station list. The
display will show [FFF N]. FFF denotes the channel currently being scanned,
and N indicates how many stations have been detected.
16. When the scan is complete digitizor will play the DAB station that is listed first
alphabetically.
17. Your DAB aerial may require internal / phantom power (please refer to your
DAB aerial's instructions), in which case you MUST switch on the aerial power,
otherwise the aerial will not function properly, if at all:
a. Press the remote's 'MENU' button. Your radio’s display shows ‘87.6’.
b. Press the
▼
button repeatedly until 'ANTENNA' shows on your radio's display.
c. Press the
■
button.
d. Press the
▼
button until 'ANT ON' shows on your radio's display.
e. Press the
■
button.
f. Display shows 'DONE'. Aerial power is now 'ON'.
g. Press and hold the DAS button to re-scan for DAB stations.
18. Use the
▲ ▼
buttons to select a DAB station of your choice. Stations may
take a few seconds to tune, depending upon your FM/AM radio. Your digitizor is
now running in AFC (Automatic Frequency Change) mode.
19. Secure the digitizor box and tidy the cables AWAY from the digitizor box. Avoid
coiling excess power or aerial cables.
20. Check all is working correctly, re-fit the FM-RDS radio and you are ready to
enjoy in-car DAB!
21. Please turn to page 16 and check the detailed AFC mode instructions.
