OIL CHANGE PROCEDURE
19
11.1: Place the wheel
against a wall at an angle.
11.2 Remove the SWAP
bolts and brake rotor.
11.3: Loosely install two
SWAP bolts as shown to
retain the gearhub in the
SWAP. Do not tighten.
11.4: Remove the oil plug.
CAUTION !
Make sure to remove all braking components before
attempting the oil change procedure. Over-filling the gearhub
will cause leakage that can damage braking components.
11.5: Position the wheel against the
wall at a 45° angle, with the oil plug
facing downwards. Let the oil drain
for 1-2 hours or more in room
temperature.
NOTE !
Please collect the used gearhub oil
and deliver it to your nearest
recycling center.
11.6: Turn the wheel around
with the oil plug facing
upwards.
11.7 Refill the gearhub with
30 ml of Kindernay Velvet
Fluid.
1
2
11.8: Reinstall the oil plug.
Tighten to 2-3 Nm.
11.9: Reinstall the brake
rotor according to Step 1.5
