10
TORQUE ARM REMOVAL
CAUTION !
Make sure to protect the hub shift cam
when removing the match cap, by
temporarily installing the HYSEQ actuator.
NOTE !
The XIV torque arm may have a slight press fit
that will require a two-jaw bearing extractor
tool for removal.
3.1: Insert the match cap
removal tool.
3.2 Tighten the 13 mm
and 17 mm nuts to secure
the match cap tool.
3.3: To protect the shift cam from
accidental damage, insert the
HYSEQ actuator on the drive side.
3.6: Remove the torque arm.
3.4: Slide a thru axle or suitable
punch through the hub from the
drive side.
3.5: Gently tap the axle or punch
to remove the match cap.
3.7: If the torque arm press fit is
too tight to be removed by hand,
use a two-jaw bearing extractor
tool as shown for removal.
