12
CHAIN SPROCKET INSTALLATION
CAUTION !
Using a sprocket with a thickness > 2.3 mm or a
non-original lockring may cause the lockring to
contact the actuator, damaging the hub.
NOTE !
The XIV is compatible with 9, 10 or 11
speed chains. Wider chains may contact
the HYSEQ actuator and cause damage.
4.1: Install sprocket.
4.2: Install the hub sprocket
lockring by rotating clockwise.
4.4: Verify that the HYSEQ actuator has clearance
to the lockring and that there is not gap to the
input shaft. The sprocket should rotate freely
when the actuator is installed.
4.3: Torque the lockring to 30
Nm.
Clearance
No gap