Kindermann KX 535W, Руководство пользователя

Страница: 35 / 79

35
Setting
Enable to control the fan through the Setting
menu.
You can select the running speed of the fan
according to the altitude of the location where
the projector is installed.
Off ......Normal speed. Set it so if the projector
is operated at a lower altitude.
On ......Faster than Off. Set it so if the projector
is operated at a higher altitude because
fans will produce weaker effects.
Change the brightness of the screen.
Normal ... Select it when high luminance is
required.
Eco ......... Select it when lower luminance
than Normal is required.
This function provides the following options in
the cooling fans’ operation after turning off the
projector.
Normal ... Normal cooling speed.
60 sec ... Faster and lounder than Normal,
cooling time is shorter.
0 sec ..... Enable you directlt unplug the AC
power cord after turning off the
projector, no need waiting for cooling.
High land
Lamp control
Cooling fast
Display
Color adjust
Setting
Expand
Info.
Adjust Select Back
Memory
Viewer
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Key lock
Iris On
Closed caption Off
Sound
Terminal Computer 2
HDMI setup
Display
Color adjust
Setting
Expand
Info.
Adjust Select Back
Memory
Viewer
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Key lock
Iris On
Closed caption Off
Sound
Terminal Computer 2
HDMI setup
Display
Color adjust
Setting
Expand
Info.
Adjust Select Back
Memory
Viewer
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Key lock
Iris On
Closed caption Off
Sound
Terminal Computer 2
HDMI setup
High land
Lamp control
Cooling fast

Note:
- Plese set High land "Off" when operating the
projector in the elevation of below 1400m.
- Plese set High land "On" when operating the
projector in the elevation of above 1400m
and below 2700m.
- Do not operate the projetor in the elevation of
above 2700m.

Note:
When you want to reduce the power
consumption, extend the service life pf the
lamp and reduce the operation noise, please
set Lamp conrtol to Eco rather than Normal.