Kindermann KX 535W, Руководство пользователя

Страница: 20 / 79

20
Basic operation
Turn off the projector
Power off ?
“Power off ? ” disappears after 4 seconds.
1. Press the Power button on top control
or on the remote control, and “Power off?”
appears on the screen.
2. Then, press the Power button again in 4
seconds. The POWER indicator
starts to flash red, and the cooling fans
keep running (You can select the level of
fans’ quietness and running speed.). Now
you can unplug the AC power cord after the
fans stop running.
3. When the projector has cooled down enough
to be turned on again, the POWER indicator
stops flashing.

Note:
● When the On start function is “On” , this
projector is turned on automatically by
connecting the AC power cord to an AC outlet .
● The running speed of cooling fans is changed
according to the temperature inside the
projector.
● Do not put the projector in a case before it is
cooled enough.
● If the WARNING indicator flashes or
emits a red light, see “WARNING indicator”.
● While the POWER indicator is flashing, the
lamp is being cooled down and the projector
cannot be turned on. Wait until the POWER
indicator turns red to turn on the projector
again.
● The fan rotation will terminate directly if the
AC power cord is unplugged immediately after
the projector is turned off.
● The projector can be turned on after the
POWER indicator turns red. The waiting time
to restart will be shortened when the normal
power-off processing for fan cooling is
completed, comparing with the time the AC
power cord is immediately unplugged after the
power-off.
To maintain the lamp life, once you turn
the projector on, wait at least 5 minutes
before turning it off.
Do not operate the projector
continuously without reset.
Continuous use may result in shortening
the lamp life.Turn off the projector and
let it stand for about an hour in every 24
hours.