Kindermann KX 535W, Руководство пользователя

Страница: 19 / 79

19
1.Complete peripheral connections (with a
computer, VCR, etc.) before turning on the
projector.
2. Connect the projector’s AC power cord into
AC outlet. The POWER indicator turns red.
3. Press the Power button on top control or
on the remote control. The ON(G)/
STANDBY(R) indicator
becomes green and the cooling fans start to
work. The preparation display appears on
the screen.
4. If the projector is locked with a PIN code, a
PIN code input dialog box appears. Enter
the PIN code as instructed below.
Caution on handling the PIN code
If you forget your PIN code, the
projector can not longer be started.
Take a special care in setting a
newPIN code. Write down the
number in a column on page 65 of
this manualand keep it properly.
Should the PIN code be missing
or forgotten, consult your dealer or
service center.
Enter a PIN code
Press OK button, press

button to select a
number, then press OK button. select a number
and enter it to the PIN code box, then number
changes to "*", automatically move the cursor
to next box.If you fixed an incorrect number,
press MENU button to reset it again.
Repeat this step to complete entering a three-
digit number.
After entering the three-digit number, move the
cursor to “OK”, then you can start to operate
the projector.
If you entered an incorrect PIN code, the “PIN
code” and the number (***) turn red.PIN dode
will be reset within one second automatically,
Enter the correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the
"Expand" "Security" menu on pages 43 for PIN
code lock operation of the projector.
Move the cursor to OK, and press OK.
Move Select Reset
PIN Code
OK Cancel
*
Basic operation
Turn on the projector

Note:
● When the logo select is set to be "Off", the
logo will not be displayed on the screen.
----- Input PIN code Exit
PIN Code
OK Cancel