Kindermann KX 535W, Руководство пользователя

Страница: 61 / 79

61
Indicator and projector state
Check the indicator to know about the state of projector.
Appendix
WARNING
POWER
Status Solutions
Off Off The power cord is unpluged. --
Off
Red
Lighting
The power cord is unpluged. --
The projector is in standby mode
after the cooling is completed.
--
Lighting in red Lighting The replacment time of the lamp is
displayed (Stanby mode)
Replace the lamp.
Blinking in red Lighting
Replacement time of the lamp has
exceeded and the projetor cannot
be turned on.
Off Blinking
The projetor is cooled down and
after a while, the projector is turned
off.(The projector will enter standby
mode)
--
Off
Green
Lighting Projecting --
Lighting in red Lighting The replacement time of the lamp
unit is displayed.(Projecting)
Replace the lamp.
Blinking in red Lighting
Replacement time of the lamp has
exceeded and the projetor is turned
off automatically.
Off Blinking
The power cord is plugged and
the lamp is turned off. (Power
management is set to Ready)
--
Off
Orange
Lighting Abormal condition is detected nad
the projector cannot be turned on.
Turn off the projector,
unplug the power cord
and contact the dealer.
Lighting Lighting There is a problem in the contrast
shutter circuit for IRIS.
Turn off the projector,
unplug the power cord
and contact the dealer.
Off Blinking Internal temperature is abnormally
high.
- Remove any objects
which are blocking the
air intake/exhaust vent.
- Install the projector
in a locatuon with an
ambient temperature of
0
℃
-40
℃
.
- Do not use the projector
at high alititudes of
2700m or higher avove
sea level.
- Clean the air filter or
replace it.