Kinco CD420, Руководство пользователя

Страница: 59 / 108

59
d3.00 Store_Loop_Data 1: Storing all configured
parameters for the
control loop
10: Initializing all
parameters for the
control loop
Set to 1
Example 7-5 Analog
– speed mode (setting the offset voltage)
Requirement: The offset voltage is 1 V, that is, the speed is positive when the voltage is greater than 1 V, and
is negative when the voltage is less than 1 V. In this case, the voltage 10 V corresponds to 3000 rpm, and -9
V corresponds to -3000 rpm (in case of -10 V, the corresponding speed is less than -3000 rpm). Select analog
channel 1 (AIN1) to control the speed.
Fig. 7-9 Schematic diagram of Example 7-5
Calculate
filter
U
according to the offset voltage and dead zone voltage that require settings:
2047
10 10
filter
shift dead
U
v v U U

 
(In this example,
0
dead
U

, and
1
shift
U

)
Result:
Calculate
demand
V
according to the required speed :
rpm
V
, (Encoder_R:10000 inc/r)
Result:
8192000
demand
V

Calculate
filter
U
according to
demand
V
and
Factor
:
*
demand filter
V Factor U

1842

filter
U