Kilews KTM-1000, Инструкция по эксплуатации

Страница: 19 / 31

KTM-1000
18
Safety
WARNING !
Do not operate unit until you read and understand ALL safety information. Failure to do so may
result in damage to the product and/or bodily injury.
Safety Information
• Do not wear any loose articles of clothing or jewelry when operating unit
• Always wear appropriate attire when using these products (i.e. protective eye wear, pants,
closed-toed shoes)
• Always check for loose wires and cables on and around unit before beginning operation
• Keep unit and charger away from water, always store in a dry and safe environment
• Do not operate unit in a flammable or explosive environment
• Never apply torque to this unit that exceeds the maximum torque value. Doing so may result in
damage to the unit and injury to the operator
• Unauthorized personnel should never be permitted to operate this unit
• Never use additional accessories with this unit that were not included and are not from this
manufacturer. Doing so could result in damage to the unit
• Always operate unit in a clean and organized work place
• This unit should always be kept clean, dry, and free from oil and grease
• Do not perform repairs on this unit, unless you are an authorized service technician
• Always unplug unit before inspecting, cleaning, or performing maintenance on the unit
• Never perform maintenance on unit that is not in accordance with the maintenance procedures
listed in the service and maintenance portion of this manual. Failure to comply with these
instructions may result in damage to the unit
CAUTION !
Due to the high torque capabilities of the torque tester, repeated cycling of the rundown
joint can cause significant heat build-up in the joint. If the joint becomes hot to the touch,
allow time for the rundown joint to cool before continuing with testing.
Mounting
The KTM-1000 Torque Tester is capable of measuring high torque values. The tester must be mounted
firmly to a solid surface so that its base can react the torque that is applied to the input shaft of the
tester without movement. Any movement of the tester while taking readings will affect the displayed
torque value.
CAUTION !
Failure to properly secure the tester could result in damage and/or personal injury.
There are (4) M10 x 1.25 holes provided in the underside of the tester for mounting directly to a bench
using appropriate fasteners (not included). An optional bench mount bracket can be purchased as an
alternative solution for securing the tester in position.