Kilews KTM-1000, Инструкция по эксплуатации

Страница: 29 / 31

KTM-1000
28
Measuring Torque
Exporting Data From Measure Mode
Peak data collected in measure mode can be exported by tapping on
the disk icon near the lower-right corner of the screen. When this icon
is tapped, the user will first be prompted to provide a name for the
data set being exported. Once a name has been entered, the screen will
show a scrollable list contain- ing the data, as well as a number of
buttons on the left side of the screen.
Pressing the SD icon will export the data to an SD card inserted in the unit. Data may also be
exported via USB connection by pressing the USB icon (Note: this requires the use of terminal
software). As on the main measure mode screen, pressing the graph icon will display statistics about
the collected data set. Pressing the red
‘X’ icon will clear the data logged by the unit.
Data is exported to an SD card in the form of a Rich Text Format (.rtf ) document, which can be opened by
most major word processing applications. The following is an example of this output:
Date:03/31/2016
Job:CAL36 #1
Time:12:31:5
3
Unit S/N:KW1234 Transducer: 100 In Lb
Cp: 4.509
Cpk: 2.655
Readings above maximum: 0
Readings below minimum: 0
Percentage not OK:
Peak
0.000
%
Reading
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Measurement direction: CW
Maximum Torque Limit: 27.50 In Lb
Minimum Torque Limit: 22.50 In Lb
Threshold Torque Limit: 5.00 In Lb
Peak Time: 0.100 Seconds
#
Maximum
Minimum
Sigma:
In Lb
In Lb
recorded: 24.31
recorded: 23.75
0.185
24.04
24.02
23.75
23.79
23.96
24.27
24.31
23.85
23.92
24.31
23.90
23.85
23.83
23.88
23.90