31
Step 8: Deck Wall Assembly
Part 2
Fig. 8.5
Fig. 8.6
Fig. 8.4
S20
S20
043
082
042
3-5/16”
(84mm)
3-5/16”
(84mm)
16 x #8 x 1-3/8” Wood Screw
S20
082
022
B:
On the End Wall of the Deck Assembly measure 84mm in from the (022) Upright Shorts and install 1 (082)
End Barrier per side, making sure that the notched out end is at the bottom and fits over (042) End Floor Support
and that the top of the board is behind (043) SL Barrier Top. Attach each board at the top from the inside and at
the bottom from the outside using 4 (S20) #8 x 1-3/8” Wood Screws per board. (fig. 8.4 and fig. 8.5)
C:
Maintaining the measurement of 84mm install 1 more (082) End Barrier per side. (fig. 8.6)
Note: Measurement between boards cannot exceed 84mm.
022
022
The notched
out end is at
the bottom
Hardware
4 x
End Barrier 1-1/4 x 3 x 27-5/8”
Wood Parts
082
