KidKraft F29060EF, Инструкция по установке и эксплуатации

Страница: 17 / 48

1 x Lower Front Back 5/8 x 4-1/2 x 76-7/8”
1 x Upright Short 1-1/4 x 3 x 38”
1 x Upright Long 1-1/4 x 3 x 61”
1 x Floor Support Long 1-1/4 x 3 x 74-3/8”
021
023
022
024
Wood Parts
Note: It is important to note hole orientation for the following step.
A:
Refer to Step 2 but placing (023) Upright Long and (022) Upright Short on the opposite ends of the (021)
Lower Front Back. Attach each end using 1 (H2) 1/4 x 2” Hex Bolt (with lock washer, flat washer and t-nut) and 1
(S20) #8 x 1-3/8” Wood Screw making sure to note hole orientation. (fig. 3.1 and fig. 3.2)
B: Place (024) Floor Support Long so that one end is under the middle holes on (023) Upright Long and the other
end is under the end of (022) Upright Short. Attach each end using 1 (H3) 1/4 x 2- 1/2” Hex Bolt (with lock washer, flat
washer and t-nut). Check to make sure that assembly is square. (fig. 3.1 and fig. 3.3)
17
Step 3: Front Wall Assembly
021
022
022
024
S20
H2
H3
1/4” Lock Washer
1/4” Lock Washer
1/4” T-Nut
1/4” T-Nut
1/4” Flat Washer
1/4” Flat Washer
Hardware
2 x 1/4 x 2” Hex Bolts
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x #8 x 1-3/8” Wood Screw
2 x 1/4 x 2-1/2” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
H2
H3
S20
Fig. 3.1
Fig. 3.2
Fig. 3.3
021
024
023
S20
S20
H2
H3
1/4” Lock Washer
1/4” Lock Washer
1/4” T-Nut
1/4” T-Nut
1/4” T-Nut
1/4” Flat Washer
Note hole
orientation
1/4” Flat Washer
022
H2
34-3/8”
(873mm)