Page 2 of 10
Fig. 2
Fig. 1
INSTALLATION
1. Disconnect negative battery cable
2. Remove the rubber liner in the pocket above the radio to access the 7mm screw and remove the
screw. Fig. 1
3. Remove the pocket, or window switch depending on trim level, below the radio by prying loose with
a panel removal tool. Find the screw and remove. Fig. 2
4. Gently pull out on the panel just below the steering column, rotate down and remove. Fig. 3
5. Remove the two 7mm screws (one on each side of the steering column) that secure the
radio/instrument bezel. Fig. 4
10MM BOLT x2
FUSE
200W AMP/BRACKET ASSEMBLY
OVERLAY HARNESS
POWER HARNESS
WIRE TIES x6
