1
1. Applicable Outdoor Unit
This drain adaptor is for the drain pipe connection in order to enable use of the outdoor unit bottom base as
a drain pan.
Install it as follows.
NOTE
:
The applicable outdoor unit may be different depending on the product series. Be sure to con
fi
rm with
the product catalog before installation.
Applicable Outdoor Unit
Capacity
Top Flow Type
72,000 to 120,000 Btu/h
IMPORTANT NOTICE:
●
Read and understand this manual before using this drain adaptor.
●
Perform the test run after installation to check for abnormalities.
●
Forward this information to the building owner and request that they maintain all the equipment manuals.
●
Signal words are used to identify levels of hazard seriousness.
De
fi
nitions for identifying hazard levels are provided below with their respective signal words.
: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
Installation Manual for Drain Adaptor
Unit: inch (mm)
No.
Accessory
Qty.
Remarks
1
Drain Adaptor
(VP20 Equivalent)
1-11/16
(43)
Outer Diameter
φ
31/32 (
φ
25)
(Inner Diameter
φ
25/32 (
φ
20))
2
Connecting for Drain Piping
2
Rubber Cap
4
Fixing for
1
Adaptor and
3
Cap
3
Drain Cap
2
Plug for Drain Hole
2. Before Installation
Check that all the following accessories are packed with the unit before installation.
3. Installation Work
Place the outdoor unit on a
fl
at foundation or block and secure it at least 3-15/16 inch (100mm) higher than
the ground. For smooth drainage, install the outdoor unit with a slight incline on the drainage side (rear
side).
Model
DBS-TP10A
