Page 4 of 10
Fig. 9
Fig. 10
Fig. 12
Fig. 11
13.
Install the amp/bracket assembly into position as shown in Fig. 11 and secure the top of the amp
bracket using the supplied 10mm bolts.
14.
Secure the bottom of the amp bracket using the supplied ¼” screw. Fig. 12
15.
Pass the factory radio harness connecter behind the metal framework indicated by the arrow. Fig. 13
16.
Connect the amplifier harness to the amplifier and route the harness up to the radio cavity.
17.
Connect the male radio harness connecter to the female connecter of the amp harness and tuck this
connection into the void between the radio opening and the instrument cluster to avoid interference
with radio during reinstallation.
18.
Route male connector of the amp harness back around the beam as the radio harness originally
was. Fig. 14
19.
You can now connect the radio to the amplifier harness and reconnect the antennae wire and
reinstall the radio.
Fig. 13
Fig. 14
