Model PWCT Straight Countertop
2
Single piece rectangular surface. To be used with
36” or 42” high panels. Countertop extends no
more than 4" over the top of the panel to comply
with ADA guideline 4.4.1. Brackets, which are
mounted on inside of station, include steel locking
clips to prevent dislodgement. Countertop accepts
task light on receptionist side.
Note:
If countertop is installed adjacent to an in-
line height change full post, a notch must
be specified on the left, right or both sides
of the work surface.
Figure 2.
Width: 24", 30", 36", 42", 48", 54", 60", 66", 72",
78", 84"
Depth: 16"
Note:
WireWorks Countertops can be installed
on top of any height panel. Countertops
add 3" to the stated height of the panel; i.e.
a 30" high panel supports a countertop
such that the top of the countertop is 33"
above the floor (assuming that the glides
are turned out 1/2”).
Note:
Brackets are positioned on the receptionist
side of the panel. The aisle side of the
panel remains clear of brackets (except for
wheelchair height countertops).
1. Ensure that countertop is the same width as the
panel(s) to which it will be attached.
2. Ensure that the panel top cap and related trim
is installed prior to attaching the countertop.
Top cap cannot be installed after countertop is
installed.
3. Position the brackets such that the top of the
bracket is slightly (1/8") above the panel top
cap. Note: Brackets are handed and "L" and "R"
are stamped into the top flange of the brackets.
Figure 1.
Receptionist
Aisle
Countertop support lock (L)
Countertop support
bracket (L)
Countertop support bracket (R)
Countertop support
lock (R)
Figure 1
Panel
Lock
Bracket
