16
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
RoomScape
®
Residence Hall Furniture - Optional Accessories
Assembly Instructions
Optional Accessories cont. -
Hang-On Flipper Door Unit
1. Hook the unit into the slots in the bed
frame above a worksurface, or at any
desired location. Mount both sides of
unit at the same time and press down
to securely engage mounting hooks
into frame (Figure 10).
Personal Shelf
1. The personal shelf can be hung
anywhere along a bed unit with a
side rail (Figure 10).
Free-Standing Dresser Top &
Free-Standing Pedestal Top
1. Locate the two-sided tape at the
underside of dresser/pedestal top.
Remove the backer from the tape,
then carefully position the top onto
the dresser/pedestal, aligning all
edges. Press down to secure in place
(Figure 10).
Center Drawer
1. Center drawer (Figure 10)
installs under a worksurface. See
instructions on page 18.
Hang-On Megasurface
1. See instructions on page 6 and 12.
Tackboard
1. Hook the tackboard into the slots in
the bed frame above the worksurface,
or any other desired location. Engage
both sides of the tackboard hooks
at the same time and press down to
secure (Figure 11).
Sliding Keyboard Tray
1. See instructions on page 21.
free standing
dresser top
pedestal
top
personal
shelf
hang-on
flipper door
unit
center
drawer
Figure 10
Figure 11
sliding
keyboard
tray
tackboard
hang-on
megasurface
