KI Extol, Инструкция по сборке и руководство пользователя

Страница: 7 / 12

Extol
™
Auditorium Seating
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
7
Seat Attachment
Note: Seat size and location
are noted on the space-planning
layout. Each seat assembly is
marked with its size. Stage seats
at site location according to the
space plan.
1. Starting at one end of a row and
one seat at a time, position a
seat assembly onto the two seat
support brackets of the uprights.
Align the mounting holes of the
assembly with the holes of the
brackets. Place a flat washer on
a M8 x 25mm cap screw and
loosely attach the seat assembly
points to the seat support
brackets. Do not tighten fully at
this time (Figure 6).
2. When all seats of a row are loosely
attached, tighten all M8 x 25mm
bolts in the row securing seats to
upright support brackets. Check
for free seat rotation up and down
and adjust if necessary. Install
all seat-mount shrouds to seat
support brackets by snapping into
place (Figure 6).
3. At this time, tighten all hardware
securing backs to uprights, and
tighten all floor anchors, properly
securing uprights to the floor
according to proper anchor
specifications.