KI Extol, Инструкция по сборке и руководство пользователя

Страница: 8 / 12

8
Extol
™
Auditorium Seating
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
ADA Removable Base
Note: The instructions below
detail the installation of Extol
uprights to the ADA removable
base using the two different
glide lengths. It is important to
follow the assembly instructions
completely during installation.
1. Begin installation by first locating
the “outer base glides”, with
the shorter threaded shafts. As
illustrated, place all outer glides
(shorter shaft) up through the
mounting holes in the ADA
base and secure using
5
/
16
” nuts
provided (Figure 7).
2. Locate the longer shaft, “base to
upright glides” provided. Starting
at one end of the ADA base with
the appropriate end upright,
position the foot of the upright
onto the ADA base and align two
mounting holes as illustrated.
Insert the base to upright
glides (longer threaded shaft)
up through the ADA base and
through the mounting holes in the
foot of each upright as illustrated.
Secure the components together
using
5
/
16
” nuts on the glides
(Figure 7).
3. Follow instructions on pages 1,
2 & 4 (Figures 2, 3, 4 & 6) for
proper back and seat attachment.
If equipped with accessories such
as tablet arms, refer to those
instructions too.
4. Place the assembled ADA
Removable Base with Extol
Auditorium Seating to the desired
site location for mounting to
the floor. Accurately mark the
mounting holes to the floor, then
move the unit out of the way.
5. Drill mounting holes and install
anchoring hardware into the floor.
Follow the proper floor fastener
requirements for the site.