KI Extol, Инструкция по сборке и руководство пользователя

Страница: 10 / 12

10
Extol
™
Auditorium Seating
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
ADA Flip-Up Arm Row Marker
installation
Note: The ADA Flip-Up Arm
Upright installs the same as other
uprights. The instructions below
illustrate how to pre-drill and
install row markers correctly.
1. Begin row marker installation by
first reviewing the Figure 9 drill-
ing diagram. Locate the top of the
armcap and take care to measure
down 13.41” from the top of the
armcap, to the side of the upright
at the location as illustrated
(Figure 9).
2. At 13.41” down from the top of
the armcap, follow the diagram
dimensions and mark two drilling
locations at 1.65” apart to be
horizontal with the top of the seat
support bracket. Use a center
punch to accurately mark drilling
locations, then drill two marker
mounting holes using a #37 drill
bit (Ø.104” dia.) (Figure 9).
3. Use two Phillips head 8mm wood
screws to attach row marker to
side of upright (Figure 10).