![background image](http://html1.mh-extra.com/html/feather-and-black/malvern/malvern_quick-start-manual_3769017001.webp)
MALVERN Bunk Bed
IMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
Thank you for buying the MALVERN Bunk Bed
• Please take a few quiet minutes to read these instructions
• It is recommended that this product is assembled by two adults
• This product contains small parts, kee p
small children clear of the assembly area
• Lay out the parts on a clean, flat surface and compar e with the parts checklist. Save
all packaging until assembly is complete to avoid accidentally discarding fittings
PRODUCT SAFETY
• All assembly fastenings should always be tightene d
properly and care should be
taken that no fittings are loose
PRODUCT CARE
• Wipe clean using a soft damp cloth followed by dr y
cloth
• Do not use abrasives or cleaning products which
may contain ammonia or solvents
• Take care when handling or moving the furniture . Careless handling can damage
wooden furniture, try to lift rather than drag
• Colour may vary due to this being a natural prod
uct
TOOLS REQUIRED
PAGE 1 of 6
• Bunk bed or high bed should not be used if any structural part is broken or missing
• Children can strangle in items such as ropes, strings, cords, harnesses and belts
•
WARNING !!!
Children can become trapped between the bed and the wall.
•
WARNING !!!
High beds and upper bed of bunk beds are not suitable for children
• Maximum thickness of the mattress
220 mm
under six years due to the risk of injury from falls
To avoid risk of serious injury the distance between the top of safety barrier and the wall
shall not exceed 75 mm or shall be more than 230 mm
attached to or hung on a bunk bed/high bed
(EN 747 - 1 : 2012)