Keysight VXI Bus 75000 C Series, Руководство по обслуживанию

Страница: 19 / 62

Keysight E1463A 32-Channel Form C Switch
Service Guide
21
2 Verification Tests
Introduction
The three levels of test procedures described in this chapter are used to verify
that the Keysight E1463A 32-Channel Form C Switch Module:
–
is fully functional (Functional Verification)
–
meets selected testable specifications (Operation Verification)
–
meets all testable specifications (Performance Verification)
Test Conditions and Procedures
See Table 1-1 for test equipment requirements. You should complete the
Performance Verification tests at least once a year. For heavy use or severe
operating environments, perform the tests more often.
The verification tests assume that the person performing the tests understands
how to operate the mainframe, the switch module, and specified test equipment.
The test procedures do not specify equipment settings for test equipment, except
in general terms. It is assumed that a qualified, service-trained technician will
select and connect the cables, adapters, and probes required for the test.
It is assumed that the temperature is no greater than 25
o
C and the relative
humidity is no greater than 40%.
Performance Test Record
The results of each Performance Verification test may be recorded in the
Performance Test Record (Table 2-1).
Verification Test Examples
Each verification test procedure includes an example program that performs the
test. All example programs assume the following:
–
Controller is an HP 9000 Series 200/300 computer
–
Programming language is BASIC
–
Switch address is 70915
–
Switch card number is 1