Keysight VXI Bus 75000 C Series, Руководство по обслуживанию

Страница: 17 / 62

Keysight E1463A 32-Channel Form C Switch Service Guide 19
Recommended Test Equipment General Information
Switch Module Serial Numbers
Devices covered by this manual are identified by a serial number prefix listed on
the title page. Keysight Technologies uses a two-part serial number in the form
XXXXAYYYYY, where XXXX is the serial prefix, A is the country of origin (A=USA),
and YYYYY is the serial suffix. The serial number prefix identifies a series of
identical instruments. The serial number suffix is assigned sequentially to each
instrument. The serial number plate is located on the right-hand shield near the
backplane connectors.
Switch Module Options
The Keysight E1463A comes standard with a terminal module consisting of screw
terminals. In addition, a terminal module with solder eye terminals is available
(Option A3G).
Schematics and Component Locators
Component locators and schematics for the modules are packaged with this
manual. Clear plastic sleeves are included for storage.
Recommended Test Equipment
Table 1-1 lists the test equipment recommended for testing and servicing the
module. Essential requirements for each piece of test equipment are described in
the Requirements column.
* F = Functional Verification Tests, O = Operation Verification Tests, P = Performance Verification Tests, T =
Troubleshooting
Table 1-1
Recommended Test Equipment
Instrument Requirements Recommended Model Use*
Controller, GPIB GPIB compatibility as defined by IEEE
Standard 488-1988 and the identical ANSI
Standard MC1.1: SH1, AH1, T2, TE0, L2, LE0,
SR0, RL0, PP0, DC0, DT0, and C1, 2, 3, 4, 5. HP 9000 Series 300 or
IBM Compatible PC with
BASIC F,O, P,T
Mainframe Compatible with switch module Keysight E1401B/T or
Keysight E1421B F,O, P,T
Command Module Compatible with switch module Keysight E1405A/B or
Keysight E1406A F,O, P,T
Digital Multimeter 4-wire ohms
2-wire ohms (up to 1 GΩ) Keysight 3458A or
Keysight 34401A O,P, T