Keysight U3020AS26, Руководство пользователя и сервисное руководство

Страница: 23 / 41

Keysight U3020A User’s and Service Guide 23
Auto IP address command
This command disable or enable the use of Auto-IP standard to automatically assign an IP address
to the U3020A when on a network that does not have DHCP servers.
Syntax
SYSTem:COMMunicate:LAN:AUTOip {OFF|0|ON|1}
SYSTem:COMMunicate:LAN:AUTOip?
Example
The following command disable the Auto-IP:
SYST:COMM:LAN:AUTOIP OFF
The following query returns the current Auto-IP setting:
SYST:COMM:LAN:AUTOIP?
Typical Response: 0
DHCP command
This command disables or enables the use of the Dynamic Host Configuration Protocol (DHCP).
Syntax
SYSTem:COMMunicate:LAN:DHCP {OFF|0|ON|1}
SYSTem:COMMunicate:LAN:DHCP?
When DHCP is enable (factory setting), the instrument will try to obtain an IP address from the
DHCP server. If a DHCP server is found, it will assign a Dynamic IP address, Subnet Mask, and
Default Gateway to the instrument.
When the DHCP is disable or unavailable, the instrument will use the Static IP address, Subnet
Mask, and Default Gateway during power-on.
Example
The following command disables DHCP:
SYST:COMM:LAN:DHCP OFF
The following query returns the current DHCP setting:
SYST:COMM:LAN:DHCP?
Typical response: 0
NOTE
If you change the DHCP setting, you must cycle power on the U3020A to activate the new setting.