Keysight U3020AS26 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 41

background image

24

Keysight U3020A User’s and Service Guide

DNS command

This command assigns the IP address of the Domain Name System (DNS) server. Contact your

network administrator to determine if DNS is being used and for the correct address.
Syntax
SYSTem:COMMunicate:LAN:DNS <address>
SYSTem:COMMunicate:LAN:DNS?

Example
The following command sets the DNS address:
SYST:COMM:LAN:DNS 198.105.232.4
The following query returns the DNS address currently being used by the instrument (the quotes

are also returned).
SYST:COMM:LAN:DNS?
Typical response: “198.105.232.4”

Domain name command

This command assigns a Domain Name to the U3020A. The Domain Name is translated into an IP

address.
Syntax
SYSTem:COMMunicate:LAN:DOMain "<name>”
SYSTem:COMMunicate:LAN:DOMain?

Example
The following command defines the Domain Name:
SYST:COMM:LAN:DOM www.keysight.com
The following query returns the Domain Name currently being used by the instrument:
SYST:COMM:LAN:DOM?
Typical response: www.keysight.com

Gateway address command

This command assigns a Default Gateway for the U3020A. The specified IP Address sets the

Default Gateway which allows the instrument to communicate with systems that are not on the

local subnet. Thus, this is the Default Gateway where packets are sent which are destined for a

device not on the local subnet, as determined by the Subnet Mask setting. Contact your network

administrator to determine if a gateway is being used and for the correct address.

NOTE

If you change the DNS address, you must cycle power on the U3020A to activate the new

address.

NOTE

If you change the Domain Name, you must cycle power on the U3020A to activate the new

address.

«
...
22
23
24
25
26
...
»

Содержание U3020AS26










































Отзывы:

Нет отзывов

Похожие инструкции для U3020AS26

Бренд: Ecco Страницы: 4

Бренд: JD Squared Страницы: 15

Бренд: DAPAudio Страницы: 16

Бренд: 3M Страницы: 28

Бренд: Jacobsen Страницы: 6

Бренд: GE Страницы: 138

Бренд: ICS ELECTRONICS Страницы: 6

Бренд: Tascam Страницы: 27

Бренд: Jay-Lor Страницы: 72

Бренд: MacDon Страницы: 198

Бренд: M-Triangel Страницы: 6

Бренд: Gardco Страницы: 17

Бренд: H&S Страницы: 42

Бренд: Aeroflex Страницы: 211

Бренд: Twiflex Страницы: 5

PulseDose LT PD1000

Бренд: DeVilbiss Страницы: 58

Бренд: Aspect Medical Systems Страницы: 104

Бренд: Hupfer Страницы: 153

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды