Installation Note N5245-90109 37
Keysight Extended Power Range and Bias Tees
Upgrade Kit Order Numbers: N5244AU-921 and N5245AU-921
Step 27.Verify Option 028 is Not Installed
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— A keyboard and mouse must be connected to the network analyzer.
Verify Option 028 is Not Installed
— On the toolbar at the top of the PNA display screen, click Help.
— On the drop-down list, click About Network Analyzer.
— In the About Network Analyzer window, under Options, verify that “028” is
not listed.
— If it is listed, continue with the instructions in this step to remove
Option 028.
— If it is not listed, skip the remainder of this step and go to the next
one.
Option 028 Removal Procedure
1.
To start the option enable utility, press UTILITY
, then
,
then
. An option enable dialog box will appear.
2.
Click the arrow in the Select Desired Option box. A list of available options
will appear.
3.
In the Select Desired Option list, click 028.
4.
Click Remove.
5.
Click OK to confirm that you want to remove the license for the selected
option.
6.
Click Yes in answer to the displayed question in the Restart Analyzer? box.
System
Service
Option Enable