Keysight N5241BU-205 Скачать руководство пользователя страница 48

Страница: 48 / 60

48 Installation Note N5242-90125

Description of the Upgrade
Installation Procedure for the Upgrade

Step 32. Enable Option 205

Procedure Requirements

— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must

not

be running.

— A keyboard and mouse must be connected to the network analyzer.

Option Enable Procedure

Locate the email(s) from Keysight which contain license file attachments.

These emails are the result of

“Step 1. Obtain a Keyword and Verify the

Information” on page 13

Copy the license file(s) from the email(s) to the root directory of the USB

flash drive.

More than one license file may be copied to the USB flash drive.

Verifying and editing the license file:
For these steps, refer to the example in

Figure 25 on page 49

Verify your USB flash drive is connected to a PC.

Open your license file using a text read/write program similar to

Notepad.

If you have more than one licensed feature, delete the feature that is

not

required for this upgrade. (e.g., in this case N5242B-423 is the

correct upgrade. So, N5242B-422 is to be deleted from the text file.)

For this step, you will need a USB flash drive.
A single license file may contain more than one feature.

A single license file may contain more than one feature.

Содержание N5241BU-205





























































Результаты поиска

Содержание N5241BU-205

Отзывы:

Похожие инструкции для N5241BU-205

Бренды по названию

Популярные бренды

Keysight N5241BU-205, Установочная инструкция

Результаты поиска

Содержание N5241BU-205

Отзывы:

Похожие инструкции для N5241BU-205

Бренды по названию

Популярные бренды