Installation Note N5242-90125 39
Description of the Upgrade
Installation Procedure for the Upgrade
Install New Blue Bias-Tee Combiner Cables N5240-60097 (x1) and
N5240-60098 (x1) Gray Cables From the A71 and A74 Bias Tees "RF-IN"
to the A75 LFE Board "Port1" and "Port2" Connectors, and Cable Clamps
Onto Ferrite Beads
For the following steps, refer to
— Separate cables as much as possible
— OK to cross
— Not OK run parallel or next to each other
— Do
not
tie wrap a semirigid cable
2.
Install the N5240-60098 (x1) cables as shown. Note the orientation of the
cable (item
➀
).
3.
Install the N5240-60097 (x1) cable as shown. Note the orientation of the
cable (item
➁
).
4.
Add cable clamp 1400-1391 (x2) to cables (item
➂
).
5.
Route cables as shown.
