Keysight N5241BU-205 Скачать руководство пользователя страница 3

Страница: 3 / 60

Keysight Add LFE Capability Upgrade Kit
Upgrade Kit Number: N5242-60125

Installation Note

Description of the Upgrade

This upgrade converts your standard 2-port configurable test set analyzer

(N5241/2/9B Option 201) to an low frequency extension (LFE) analyzer with

bias tees by adding:

— LFE bias tee combiners
— PC assembly, low frequency extension (LFE)
— new cables
After installation of this upgrade, your analyzer will be an N5241B Option 205

or N5242B Option 205 2-port analyzer.

The following may apply to your "B" model PNA: In June 2013, the

N5241A/AS and N5242A/AS analyzers underwent significant hardware

changes. Some components that have 2.4 mm connectors (bias tees,

couplers, and some semi-rigid cables) were replaced with components

that have 3.5 mm connectors.

If your analyzer’s serial number prefix is MY/SG/US5310 and below:

Your analyzer was originally shipped with 2.4 mm components. The 2.4

mm couplers and connecting cables in your analyzer must be replaced

with the new 3.5 mm items included in this kit.

If your analyzer’s serial number prefix is MY/SG/US5321 and above:

Your analyzer was shipped with 3.5 mm components, so it is not necessary

to replace the couplers and connecting cables. These items are included in

this kit, but will not be used for your upgrade. Set them aside for possible

use in the future.

Be very careful to use the appropriate hardware in your analyzer. Using the

wrong hardware can ruin analyzer components, resulting in additional

customer costs

Содержание N5241BU-205





























































Результаты поиска

Содержание N5241BU-205

Отзывы:

Похожие инструкции для N5241BU-205

Бренды по названию

Популярные бренды

Keysight N5241BU-205, Установочная инструкция

Результаты поиска

Содержание N5241BU-205

Отзывы:

Похожие инструкции для N5241BU-205

Бренды по названию

Популярные бренды