Keysight N5221BU-677 Скачать руководство пользователя

Страница: 47 / 54

Installation Note N5222-90129 47

Installation Procedure for the Upgrade

Step 33. Enable Options 417

Procedure Requirements

— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— Refer to the license message you received from Keysight: Verify that the

analyzer’s model and serial numbers match those on the license message

you received from Keysight.

— A keyboard and mouse must be connected to the network analyzer.

Option Enable Procedure

Locate the email(s) from Keysight which contain license file attachments.

These emails are a result of

“Step 1. Obtain a Keyword and Verify the

Information” on page 16

Copy the license file(s) from the email(s) to the

root directory

of the USB

flash drive. More than one license file may be copied to the USB flash

drive.

Insert the USB flash drive into the PNA’s USB drive slot.

Verifying and editing the license file:
For these steps, refer to the example in

Figure 23 on page 48

Verify your USB flash drive is connected to a PC.

Open your license file using a text read/write program similar to

Notepad.

If you have more than one licensed feature, delete the feature that is

not

required for this upgrade. (e.g., in this case N5242B-423 is the

correct upgrade. So, N5242B-422 is to be deleted from the text file.)

For this step, you will need a USB flash drive.

A single license file may contain licenses for more than one instrument.

Содержание N5221BU-677























































Результаты поиска

Содержание N5221BU-677

Отзывы:

Похожие инструкции для N5221BU-677

Бренды по названию

Популярные бренды

Keysight N5221BU-677, Установочная инструкция

Результаты поиска

Содержание N5221BU-677

Отзывы:

Похожие инструкции для N5221BU-677

Бренды по названию

Популярные бренды