Keysight M9187A, Руководство для стартапов

Страница: 15 / 32

Keysight M9187A PXI Digital IO Startup Guide 15
Step 3: Install the Software on the Host Computer
Install instrument drivers
1 Insert the Digital IO Module Software and Product Information CD into the
CD-ROM drive of your PC.
Wait a few seconds for the auto-run window to appear. If the auto-run
window does not appear automatically:
– Click Start > Run...
– Type:
<drive>:Autorun.exe
where
<drive>
is your CD drive letter.
2 Select the Install Software link. Follow the installer prompts. Accept all of the
default directories specified during installation if prompted.
3 After the Welcome screen, you will be prompted three times for license
agreements. The software installer installs the following drivers:
– Keysight Modular Software License Agreement. The installer program
installs the Soft Front Panel (SFP) application and other object code to
connect to the module. Accept the license terms and click Next.
– Keysight IVI Driver Source Code License Agreement. The Interchangeable
Virtual Instrument (IVI) driver is available for programming the Keysight
modules using Microsoft development environments (e.g., Visual Studio, C,
C++, C#, Visual Basic), Keysight VEE, MATLAB, or National Instruments
Labview. Accept the license terms and click Next.
– Keysight Software License Agreement for drivers for use with LabVIEW
Software. The LAbVIEW driver provides access to the functionality of the
module through LabVIEW VIs. This driver works in National Instruments
LabVIEW development environments. Before this driver can be installed,
your computer must already have the IVI Shared Components installed.
Accept the license terms and click Next.
4 Next, the installer indicates the LabVIEW installations found on your host
computer. Click Next
5 After accepting the licenses, the driver software is ready to be installed on
your host computer. Click Install.
6 When the installation wizard is finished, you will be prompted to reboot your
host computer. Do not reboot the host computer at this time! Select “
No, I
will restart my computer later
.” Power down the host computer.
Proceed to “Step 4. Connect the Controller to the PXI Chassis” on the next
page.
Installing Keysight IO Libraries also installs the IVI Shared
Components. The IVI Shared Components are required before IVI
drivers (e.g., IVI-COM, IVI-C) can be installed from the product
reference CD.