Keysight M9187A, Руководство для стартапов

Страница: 16 / 32

16 Keysight M9187A PXI Digital IO Startup Guide
Step 4. Connect the Controller to the PXI Chassis
Step 4. Connect the Controller to the PXI Chassis
Using a remote PC
Refer to the following figure. Make certain that both the PC and the PXI chassis
are turned off. Unplug the chassis from the ac power mains. If you are using the
M9018A 18 Slot PXIe chassis, install the Keysight M9021A PCIe Cable Interface
module in the chassis.
- If you are using a desktop or rack mount PC, install the M9047A PCIe Desktop
Adapter in the PC. With a Keysight Y1202A cable, connect the adapter to the
System Interface module.
- If you are using a laptop PC, install the M9045A PCIe ExpressCard Adapter in
the laptop. With a Keysight Y1200A cable, connect the adapter to the System
Interface module on the PXI chassis
.
Using an embedded computer
Refer to the figure above. If you are using an embedded controller in the PXI
chassis, you should have installed it prior to installing the Keysight IO Libraries
and instrument drivers. No cables or other adapters are required. After
installation, proceed to “Step 5: Install the Module in the PXI Chassis”
To ensure proper system operation and the PC’s ability to
enumerate all of the PXI modules, you must use an approved
embedded PC, desktop PC, or laptop PC along with approved
PCIe adaptor and cable.
Controller
:
System Interface
:
PXI System Chassis:
18 Slot PXIe Chassis
M9021
Cable Interface
Module
Y1200A
PCIe Cable
M9045
PCIe Laptop
Adapter
Laptop PC
Y1202A
PCIe Cable
M9047
PCIe Desktop
Adapter
Rack mount PC
Desk mount or
PXIe Embedded
System Controller