Keysight Agilent X-Series, Руководство по началу работы

Страница: 18 / 119

Quick-Start
1
Getting Started Guide 19
Initializing the test set using front-panel navigation
The following keys are used in the initialization process:
Steps Actions Notes
1 Power on the test set a Position the test set so you
have easy access to the
power cord and plug it in.
b Press the power switch
(located in the lower left
corner of the test set front
panel) to turn the test set
on.
•
See “Test Set Location and Rack Mounting
Requirements and “Power requirements" on page 24
for more details.
•
The test set can require more than 5 minutes to power-
on. This is affected by Windows start-up
requirements.
•
The Agilent Technologies screen appears followed by
a screen that allows you to select the operating
system.
•
At this time, it is safe to turn off the test set before
starting the Setup Wizard.
After launching the Setup Wizard, do not turn off the test set or remove power before the
Setup Wizard completes and the system restarts. Turning off the test set may corrupt the
system and the application may not operate.