4
ACQuire Subsystem
88
Keysight 8990B Programming Guide
Remarks
– The acquisition length specified in this command corresponds to the CCDF
source selected in
“ACQuire:CCDF:SOURce <character_data>”
– This command is only applicable for channels 1 and 4. If you send this
command for a channel other than 1 or 4, error 700,“Applicable to channel
1 and 4 only” will occur.
– This command is only applicable in the CCDF acquisition mode. If the
acquisition mode is not set to CCDF, error –221,“Settings conflict;Requires
CCDF mode to be enabled” will occur. Refer to
on page 132 to set the acquisition mode.
– This command is only applicable when the CCDF sweep is set to the free run
mode. If the CCDF sweep mode is not set to free run, error –221,“Settings
conflict;Requires CCDF sweep to be in free run mode” will occur.
– If you set an acquisition length value which exceeds its minimum or maximum
limit, the value will be clipped to its minimum or maximum value respectively.
Error –222,“Data out of range;Value clipped to minimum (#)” or –222,“Data out
of range;Value clipped to maximum (#)” will occur.
Reset condition
On reset, the CCDF acquisition length is set to 100M.
Query
ACQuire:CCDF:COUNt?
This query returns the current setting of the CCDF acquisition length. The
response format is
<NRf>
.
Query example
ACQ:CCDF:COUN?
Queries the CCDF acquisition length setting.
Содержание 8990B
