Z5623A Option H01
Description
Description
The Z5623A Option H01 Dynamic Accuracy Test Set is designed for use with the PNA and
PNA-X Series Network Analyzers.
The Z5623A H01 can measure a receiver's relative power linearity (dynamic accuracy) when
used with an E-Series power meter, a thermocouple power sensor, and a test algorithm. The
Z5623A H01 was designed for maximum measurement accuracy over a 120 dB dynamic range.
The signal's amplification and attenuation is controlled via internal switches and attenuators.
The Z5623A H01 can only be controlled using an external GPIB controller.
Where necessary, part numbers will be provided in parentheses after the
description of a part for clarification. Example: “Use two Type-N 50
Ω
jumper
cables (8120-6995).”
Verifying the Shipment
To verify the contents shipped with your product, refer to the “Box Content List” included with
the shipment.
Inspect the shipping container. If the container or packing material is damaged, it should be
kept until the contents of the shipment have been checked mechanically and electrically. If
there is physical damage refer to
“Contacting Keysight” on page 33
. Keep the damaged
shipping materials (if any) for inspection by the carrier and an Keysight Technologies
representative.
Table 1
Z5623A Option H01 Accessories Supplied
Description
Part Number
Qty
Power Cord
See
1
Rack Mount Kit
5063-9232
1
Front Handle Kit
5063-9226
1
User’s and Service Guide
Z5623-90001
1
Keysight Z5623A-H01 User's Guide
3
