Keysight Technologies U3810A, Руководство по началу работы

Страница: 20 / 134

Keysight U3810 Series Getting Started Guide 20
Set Up the U3810A System
Configure the Keysight U3810A as a “cape”
Depending on your purchase configuration, your kit will either be supplied with a BeagleBone
CPU out of the box or you will supply your own BeagleBone CPU.
Assure that the Keysight U3810A IoT System Design Module Training Kit is configured as a “cape”
on top of the BeagleBone CPU.
Source: beagleboard.org
1 Remove the U3810A Printed Circuit Assembly (PCA) and Baseplate from its anti-ESD bag.
2
If you are supplying your own BeagleBone CPU, perform the Assembly procedure provided in
Appendix F – Assembly and Disassembly
to install the BeagleBone CPU on the blank baseplate,
then installing the U3810A main board and snap-off accessories on top of the BeagleBone CPU.
Sensor and Xbee3 Module Installation
1
Remove the five (spare) snap-offs and place in an anti-ESD bag (provided).
2 Install the three Xbee3 Transceiver Modules in sockets marked XB , XB1 , and XB2 .