Keysight Technologies U3810A, Руководство по началу работы

Страница: 30 / 134

Keysight U3810 Series Getting Started Guide 30
Establish Secure Shell (SSH) Communication between BeagleBone and PC
In this exercise, you will connect the PC (Host) to Beagle Bone via a USB cable and establish a RNDIS
connection. RNDIS is the Remote Network Driver Interface Specification. It defines internet
connection via USB and this connection provides a virtual network to the Beagle Bone that supports
various network protocols including SSH and HTTP. Once the connection is established, a PuTTY
terminal using SSH can be used. The local documentation on the webpage can also be explored.
The RNDIS Network IP address of the BeagleBone will be
192.168.7.2
while your PC will be at
192.168.7.1 .
WARNING
When JP1 is in place do not connect a USB cable to both the BeagleBone and J15 at the
same time, or anomalous behavior may result.
1
Remove the USB cable from J15 and connect it instead to the BeagleBone CPU USB port to your
PC. This will also power up the U3810A. It may take up to one minute to complete the boot
process.