U3020AS62
Instrument Settings
DNS Command
This command assigns the IP address of the Domain Name System (DNS) server. Contact
your network administrator to determine if DNS is being used and for the correct address.
Syntax
SYSTem:COMMunicate:LAN:DNS <address>
SYSTem:COMMunicate:LAN:DNS?
If you change the DNS address, you must cycle power on the U3020A to
activate the new address.
Example
The following command sets the DNS address:
SYST:COMM:LAN:DNS 198.105.232.4
The following query returns the DNS address currently being used by the instrument (the quotes
are also returned).
SYST:COMM:LAN:DNS?
Typical Response: "198.105.232.4"
Domain Name Command
This command assigns a Domain Name to the U3020A. The Domain Name is translated into an IP
address.
Syntax
SYSTem:COMMunicate:LAN:DOMain "<name>"
SYSTem:COMMunicate:LAN:DOMain?
If you change the Domain Name, you must cycle power on the U3020A to
activate the new address.
Example
The following command defines the Domain Name:
SYST:COMM:LAN:DOM www.keysight.com
The following query returns the Domain Name currently being used by the
instrument: SYST:COMM:LAN:DOM?
Typical response: www.keysight.com
Keysight U3020AS62 User's and Service Guide
19
