U3020AS62
Instrument Settings
1. Click
Add Instrument
on the tool bar to search the network for instruments.
2. Select
Add LAN Instrument on LAN (TCPIP0)
>
OK
. Keysight Connection Expert performs
an automatic find of all instruments on the same subnet as the computer.
3. Select the desired instruments from the list and click
OK
. Communication paths to the
instruments are verified and the instruments are added to the configured interface.
Figure 6
Adding Instruments
Configuring the GPIB Interface
Programming access to the Test Set is also available through the instrument's GPIB interface.
The GPIB connector is located on the rear panel of the instrument.
1. Select the
Keysight Control
icon >
Keysight Connection Expert
. If a GPIB card is installed in
your computer, the GPIB interface was configured during installation of the IO libraries and
is displayed in the Explorer Pane of the “Welcome” Screen.
Figure 7
Keysight Connection Expert
16
Keysight U3020AS62 User's and Service Guide
