Keysight Technologies S9100A, Руководство для стартапов

Страница: 56 / 107

6 Verify Operation
6. 1 Verifying X-Apps Software Controls the S9100A
This process must be repeated for each M9410A and its selected
X-Apps software pair in a system.
6. 1. 1 Verify the X-Apps Software Controls the S9100A at 3 GHz
1. Connect an RF loop-back cable from RF In to RF Out connectors on the
RF Transceiver, located on the Rugged Front Panel.
(This loop-back cable is NOT included with the S9100A.)
This connection can be made using a cable with two adapters.
For example, a cable with adapters (or equivalent) can be used:
one 5063-1530 RF Cable, SMA (m) to SMA (m), 152.4 mm (6.0 in) and
two 1250-1250 Adapters, SMA (f) to Type-N (m)
2. If it is not already running, start the Modular TRX software and
review the interface; this interface is referred to as a Mode:
The Modular TRX interface can be started as follows:
Select the Start menu (lower-left corner icon)
> Scroll down to " K " applications
> Select the Keysight Modular Transceiver drop-down arrow
> Scroll down the list and select LaunchModularTRX
Each Mode looks different and has its own collection
of measurement capabilities, controls, windows, and SCPI commands.
Each Mode runs within a screen (there can be multiple screens).
Screens are shown as tabs across the top of the interface.
IQ Analyzer Mode is included with the S9100A
and appears as a tab with the label IQ Analyzer 1.
52 S9100A 5G Multi-Band Vector Transceiver, Startup Guide