Keysight Technologies S9100A, Руководство для стартапов

Страница: 50 / 107

4 Install Hardware
Connect the hardware as described in the following table.
Item Qty Connection To... From...
1, 2,
11 3 8121-3044 RF Cable, SMA (m) to SMA (m), 350 mm (13.8 in)
Connect LO Card LO Aux Out to LO Distribution Card LO In.
Connect LO Card LO Out to Channel Card LO In (left-side card).
Connect LO Distribution Card LO Out 1
to Channel Card - No DUT IF LO In (right-side card).
3 1 8121-3199 BNC Cable, BNC (m) to BNC (m), 300 mm (11.8 in)
Connect S9100A 10 MHz Out to E7770A CIU 10 MHz In.
4 1 8121-1351, LAN Cable, Patch-5E RJ-45 (m) to RJ-45 (m)
24-AWG 8-Conductor PVC, 2133.6 mm (84 in), Blue or equivalent
Connect M9037A PXIe Embedded Controller LAN 2
to E7770A CIU LAN CONTROL (rear panel).
5 1 S9100-60003 RF Cable, SMA (m) to TNC (m), 1100 mm (43.3 in)
Connect E7770A CIU CHANNEL 2A, LO/CTRL/PWR (rear panel)
to S9100A labeled: "Ch 1A In" (front panel).
6 1 S9100-60005 Three-Cable Bundle (Color-Coded)
White, SMA (m) to Type-N (m), 4000 mm (157.5 in)
Connect M1740A IF In/Out to S9100A IF In.
Black, SMA (m) to Type-N (m), 4000 mm (157.5 in)
Connect M1740A IF In to S9100A IF Out.
Red , SMA (m) to TNC (m), 4000 mm (157.5 in)
Connect M1740A LO/Pwr/Ctrl IF In
to S9100A LO/Pwr/Ctrl Out.
7, 8 2 S9100-60011 RF Cable,
SMA (m) to Type-N (m), 1100 mm (43.3 in)
Connect from E7770A CIU CHANNEL 1A, DUT IF OUT (rear panel)
to S9100A labeled: "From Ch 1A DUT IF Out" (front panel).
Connect from E7770A CIU CHANNEL 1B, DUT IF IN (rear panel)
to S9100A labeled: "To Ch 1B DUT IF In" (front panel).
9, 10 2 S9100-60012 RF Cable,
Type-N (m) to Type-N (m), 457 mm (18 in)
Connect Channel Card IF Out B to CIU DUT IF Interconnection, IF In.
Connect Channel Card IF In A to CIU DUT IF Interconnection, IF Out.
1 8121-3222 loop-back cable, 2.4 mm (m) to 2.4 mm (m), 152.4 mm (6.0 in)
Connect this loop-back cable from RF Tx/Rx 1 to RF Tx/Rx 2
on the M1740A mmWave Transceiver.
46 S9100A 5G Multi-Band Vector Transceiver, Startup Guide