30
Keysight N5991 SATA Test Automation Software Platform User Guide
3
Using the Software
Table 3
SATA sequencer parameters
Common Parameters
The common parameters are used for several related calibration or test
procedures. They are displayed on the right side of the ValiFrame user
interface. They appear when the selected entry of the procedure tree on
the left is a group instead of an individual procedure.
The SATA Receiver Test Software has some group parameters (in addition
to “Repetitions”) on the top-level entry of the procedure tree as shown in
. These parameters are common for all ValiFrame procedures.
Table 4
SATA common parameters
Procedure Parameters
The Procedure Parameters are all such parameters that are separate from
the previously described categories. They are shown on the right side of
the ValiFrame user interface. They appear when the selected entry of the
procedure tree on the left is an individual procedure. These parameters
only change the behavior of the selected procedure. Procedures often
have parameters with the same name, but the configured settings always
apply on the selected procedure, and the meaning may be slightly
different.
Parameter Name
Description
Procedure Error Case Behavior
•
Proceed With Next Procedure—If an error occurs in the current test or calibration procedure, continue
by running the next procedure in the sequence.
•
Abort Sequence—Abort the further running of the sequence.
Procedure Failed Case Behavior
•
Proceed With Next Procedure—If the current test or calibration procedure fails, continue by running
the next procedure in the sequence.
•
Abort Sequence—Abort the further running of the sequence.
Repetitions
The number of times the group or procedure will be repeated. If the value is '0', it runs only once.
Parameter name
Description
Skip Instrument Reset
When set to true, ValiFrame will skip the reseting of all the
instrument at the beginning of each run.
Содержание N5991ST3A SATA
